DC-4 V999D Plus + welding helmet
– Auto dark shade selection mode
You decide if you want to select manually the dark shade or if you prefer to put it on auto mode. The ADF will automatically select the dark shade according to the light intensity. In this mode, you will still be able to adjust up to 2 shades more or 2 shades less so that you can adapt the pre-selected shade to your own sensitivity.
– Auto sensitivity adjustment mode
You alternate different types of welding? Maybe some times in TIG in low amp. or some times with a MIG welder? In this mode, no need to adjust each time the sensitivity to the arc light! The ADF will automatically adjust itself according to the intensity of the arc light.
– Auto delay adjustment mode
In this mode, the ADF will calculate the time of returning to the clear shade depending on the light intensity and the time of the welding. The idea is to avoid sudden changes of light for the eye to increase eye comfort to reduce eye strain.
– 10 memories
You can save up to 10 different settings depending on the type of welding or parts beeing produced. This will save you time each time you change of welding process.
– Gradient mode
To avoid eye strain, this mode will allow the ADF to return progressively to the clear shade after finishing the welding.
– Easy side press button to switch from welding to grinding mode
You can use your welding mask not only for welding but also for grinding without having to take off your helmet or welding gloves. Easy located on the left side of the helmet, with a 1,0 sec. press, the mode is changed!
– 5 independant arc-sensors
Better arc detection in all angles to avoid arc-flash
– Dark shade up to shade 14
Suitable for high amperage welding
– Energy supply
Solar + 2 Replaceable CR2032 lithium battery
All this, without forgetting it´s XXL viewing area from 98 x 87 mm and with 1/1/1/1 certification!
Larger viewing area for greater comfort.
