DC-1 330 + hard hat

Set made out of the DC-1 welding helmet with hard hat and mineral welding glass with large viewing area of 90 x 110 mm ,pair of helmet adaptors and a construction helmet. The helmet adaptors are inserted into the standard lateral slots of the construction helmet. They can be easily removed to allow the operator to wear the helmet without the welding helmet while on the move for example.

The Terano construction helmet is characterized by its light weight of only 285 gr. Made of ABS, it resists the passage of time, scratches and projections of molten metal better than traditional PE helmets. Equipped with a textile harness and ratchet closure, the fit to the head is comfortable and firm. In combination with the DC-1 Flip welding helmet, you will have one of the lightest welding helmet and construction helmet sets on the market.

The Rockman construction helmet is characterized by its design with DeForma Tec technology: the design of the headgear anchorage is conceived to absorb the impact energy through deformation and thus prevent it from being transmitted to the operator’s neck, thus considerably reducing the risk of injury. Made of PE, it maintains a reduced weight of only 315 gr. Equipped with a textile headgear and ratchet closure, the fit to the head is comfortable and firm.

56,5264,07

Clear

Downloads

Construction helmets features:

TERANO

  • With only 285 gr, the Terano helmet is one of the lightest and most comfortable to wear
  • Rear extension for a better protection of the neck
  • Short peak for better upward visibility
  • Made of ABS, it better resists the passage of time, scratches and projections of molten metal
  • The headgear is made out of textile bands and comes with ratchet closure to ensure a firm and comfortable fit
  • Replaceable sweatband that covers from temple to temple with super-absorbent properties
  • Certification: CE EN397, -30ºC

ROCKMAN

  • DeForma Tec Technology: The fixations points of the headgear are designed to absorb impact energy by deformation on impact rather than transmitting it to the head
  • Reduces the energy transmission allowed by EN397 by 30% and up to 50%
  • Rear extension for a better protection of the neck
  • With rain draining rim
  • Good side impact stability
  • Short peak for better upward visibility
  • The finish on the crown of the helmet is rough to avoid marks produced when the helmet is left upside down on an abrasive surface
  • Helmet material: PE
  • Certification: CE EN397, -30ºC

DC-1 330 for hard hat features:

  • Ultra light weight of only 330 gr. (optical filter not included)
  • The DC-1 welding helmet can easily be removed from the hard hat in order to use it alone when not welding
  • Allows 90 x 110 mm passive filters and ADF
  • Maximum protection of the face, neck and ears against light radiation and projections
  • Easy replacement of the outer filter cover from the front without having to remove the optical  filter.
  • Outer frame to hold the filter cover to prevent the intrusion of projections and fumes into the space between the filter cover and the optical filter
  • Concave front for a vision without annoying reflections and better evacuation of welding fumes
  • EN175 class S certification for mechanical resistance

 

Hard hat

,

Hard hat colour

Blue, Green, Orange, Red, White, Yellow

Passive filter shade

DIN 08, DIN 09, DIN 10, DIN 13, DIN 14, DIN 11, DIN 12

Shopping Cart
Scroll to Top
blob-peq

Encuentra tu punto de venta

Déjanos tus datos y te pondremos en contacto con tu distribuidor más cercano.