▷ DC-Guard + Chinguard + DC-1 (Anti mist Acetate) | DACAR

DC-Guard + Chinguard + DC-1 (Anti mist Acetate)

The combination of the DC-1 welding helmet with the DC-Guard face shield with an anti-fog acetate visor and an additional chin cover is the ideal combination to alternate welding with grinding tasks while maintaining a wide field of vision and maximum face coverage thanks to the 450 x 170 mm visor. With an additional chin guard to prevent the intrusion of particles from the bottom, the acetate visor offers better scratch resistance than the polycarbonate visor and its anti-fog treatment gives it a very versatile use. This set accepts 90 x 110 mm. Auto Darkening Filters or passive filters (to be ordered separately).

Dacar products can be purchased either online or through our dealer network. Ask us for information about your nearest distributor.


Ref.: IV3072CGDC1 Categorías: ,

DC-1 welding helmet:

  • Ultra light weight of only 330 gr. (optical filter not included)
  • Headgear with MDD (Mass Distribution Device)
  • For electronic and passive filters of 90 x 110 mm.
  • Maximum protection of the face, neck and ears against light radiation and projections
  • Easy replacement of the outer filter cover from the front without having to remove the optical  filter.
  • Outer frame to hold the filter cover to prevent the intrusion of projections and fumes into the space between the filter cover and the optical filter
  • Concave front for a vision without annoying reflections and better evacuation of welding fumes
  • EN175 class S certification for mechanical resistance

DC-Guard face shield with acetate visor and chin guard:

  • Optical class 1
  • Impact resistance class F
  • CE EN 166
  • The chin guard provides added protection against the penetration of particles and fumes from the lower area
  • Visor with anti-fog treatment for clear vision at all times
  • Acetate has good abrasion and scratch resistance (compared to polycarbonate) and good chemical resistance

Compatible Auto Darkenning Filters:


  • Clear shade with grey ultra-clear True Color LCD technology
  • Dark shades: DIN 5 – DIN 8 / DIN 9 – DIN 13 with internal selector and regulator
  • Adjustable dark to clear time with internal potentiometer from 0.1 to 1 second
  • Internal adjustment of arc sensitivity
  • Grinding mode with internal selector
  • Large viewing area 100 x 53 mm
  • 4 independent arc sensors
  • Switching speed: 0.04 ms
  • Optical quality CE EN379 1/1/1/2
  • With replaceable CR2032 battery combined with solar cells for a longer life time
  • 2 years warranty
  • Suitable for MIG-MAG, TIG, electrode, pulsed arc, plasma, micro-plasma, gas welding, cutting and grinding

EL PASO V913I (ADF 600I):

  • Clear shade DIN 3,5 with gray True Color LCD
  • Variable dark shade from 9 to 13 with internal command
  • Delay regulaton from 0,1 to 1 sec. and sensitivity regulation with inner commands
  • Optical quality 1/1/1/2
  • Solar + non replaceable lithium battery powered
  • 2 arc sensors
  • Switching time: 0,1 ms.
  • Viewing area 41 x 100 mm.
  • 2 years warranty

EL PASO F11 (ADF200F):

  • Clear shade DIN 2,5 with gray True Color LCD
  • Fixed dark shade 11
  • With 2 internal switches for High or Low Sensitivity regulation and Long or Short Delay time
  • Optical quality 1/1/1/2 CE EN175
  • Solar + non replaceable lithium battery powered
  • 2 arc sensors
  • Switching time: 0,3 ms.
  • Viewing area: 91 x 39 mm.
  • 2 years warranty


Shopping Cart
Scroll to Top

Encuentra tu punto de venta

Déjanos tus datos y te pondremos en contacto con tu distribuidor más cercano.